Electric Actuator threaded ball valve consists of electric actuator and two-piece/three-piece ball valve with ISO 5211 upper flange. The valve body material is CF8 and CF8M, the valve seat material is PTFE and PPL, and the pressure level can be selected from 1000WOG and 2000WOG
Electric stainless steel threaded ball valve manufacturer
Electric threaded ball valves can be divided according to the type of actuator: switch type, analog adjustment type (4-20ma), explosion-proof type, diving type, etc.
Electric threaded ball valve can be divided according to the type of valve body: 1000WOG, 2000WOG, two-piece, three-piece, etc.
Voltage can be selected: DC24V, AC110V, AC220V, AC380V, etc.
Withstand temperature: -50℃-250℃
Body selection: 1000WOG/2000WOG
Two-piece/Three-piece
Electric actuator selection: switch type, analog adjustment type, 485 communication type
Material: stainless steel CF8, CF8M
Thread type: NPT thread, G thread, etc.
3/2PC Electric threaded ball valve
On the left side of the above picture, the 2pc electric threaded ball valve is assembled into two parts, which is cheaper than the 3pc.
On the right side of the above picture, the 3pc electric threaded ball valve is assembled into a whole by a 3-section structure, fastened with long bolts, and the pressure rating and price are higher than that of 2PC.
Electric threaded ball valve 1000WOG & Electric threaded ball valve 2000WOG
The difference between the 1000WOG threaded ball valve and the 2000WOG threaded ball valve is that the 1000WOG has a lower pressure, and the overall structure of the valve body is thinner than the 2000WOG. We recommend that the maximum pressure is 4Mpa. The 2000WOG ball valve has a relatively high pressure and is relatively thick, and the valve is much stronger. We recommend a maximum operating pressure of 8Mpa.