Press-Fit Globe Valve is mainly made of Stainless steel material, and it can also be called press to connect Stop Valve. It is faster and more hygienic to weld than threaded connection in the pipeline used for water supply.
Press End Connections Globe Valve
Pressure resistance, corrosion resistance, universal replacement of accessories, low cost. If the valve is not tightly closed or even leaks, there is no need to replace the entire valve on the pipeline, just replace the gasket or valve core, reducing maintenance costs.


no | name | material |
1 | Body | CF8/CF8M |
2 | Nut | 304/316L |
3 | Gasket | 304/316L |
4 | Seat | PTFE |
5 | Disc | CF8/CF8M |
6 | Jam nut | 304/316L |
7 | Stem | 304/316L |
8 | Gasket | PTFE |
9 | Bonnet | CF8/CF8M |
10 | seal ring | 304/316L |
11 | V-filler | PTFE |
12 | Pressing ring | 304/316L |
13 | Jam nut | 304/316L |
14 | Hand wheel | QT400-15 |
15 | Nut | 304 |
Pressure resistance, corrosion resistance, universal replacement of accessories, low cost. If the valve is not tightly closed or even leaks, there is no need to replace the entire valve on the pipeline, just replace the gasket or valve core, reducing maintenance costs. Can also be used as a tee.
Stainless steel pipes are more and more widely used in domestic water supply and industrial pipeline engineering, and the products are diversified. Valves are an indispensable shut-off valve in the pipeline. In the construction of stainless steel thin-wall pipes, the most commonly used connection methods are single clamping, double clamping, ring pressing and welding. To connect pipe fittings such as single clamp pressure, double clamp pressure and ring pressure with the valve, it is necessary to add some pipe fittings with wires or flanges to connect with the valve (welding is not required). In this way, their installation cost will increase. If the valve has sealing problems during use, the whole valve or the whole pipe can only be replaced.
Press-Fit Stop Valve
As a long-term used item, the sealing effect of the valve will be worse and worse due to aging, wear and other reasons. The poor sealing effect will lead to the problem that the valve is not closed tightly or even leaks. Therefore, the whole valve can only be replaced during maintenance. The cost is high. Since the pipeline has been laid and there are pipes at both ends of the valve, the replacement of the valve will involve the moving of the inlet and outlet pipes, and the replacement of the valve will increase the difficulty, The maintenance intensity of workers is high.
In view of the problems existing in the above existing technologies, the company specially introduces a new practical multi-functional environmental protection valve with low maintenance cost and simple replacement.
press to connect Globe Valve


Press End Connections outer diameter
A series of | size | Second series | 15.9*0.8 | German | 18*1 |
A series of | 16*1 | Second series | 22.2*1 | German | 22*1.2 |
A series of | 20*1.2 | Second series | 28.6*1 | German | 28*1.2 |
A series of | 25.4*1.2 | Second series | 34*1.2 | German | 35*1.5 |
A series of | 32*1.5 | Second series | 42.7*1.2 | German | 42*1.5 |
A series of | 40*1.5 | Second series | 48.6*1.2 | German | 54*1.5 |
A series of | 50.8*1.5 | Second series | 76.1*2 | special | 60.3*1.5 |
A series of | 76.1*2 | Second series | 88.9*2 | special | 63.5*1.5 |
A series of | 88.9*2 | Second series | 108*2 | ||
A series of | 101.6*2 |
press to connect Stop Valve
Welding, single clamping, double clamping, ring pressing, outer wire, inner wire, union, flange, etc. Can be customized according to customer requirements.

sies | L | D1 | D2 | H |
1/2″ | 60mm | 15.9mm | 13.7mm | 90mm |
3/4″ | 60mm | 22.5mm | 17.4mm | 90mm |
1″ | 60mm | 29mm | 25mm | 120mm |
1 1/4″ | 70mm | 34.5mm | 31mm | 130mm |
1 1/2″ | 80mm | 43mm | 39mm | 140mm |
2″ | 100mm | 49mm | 46mm | 150mm |
2 1/2″ | 120mm | 71.1mm | 65mm | 180mm |
3″ | 130mm | 84mm | 79mm | 185mm |
4″ | 180mm | 103mm | 96mm | 215mm |